Isolate your pumps – simply and automatically – with our Pump Isolation Valves
Isolate the duty and standby pumps in your mineral processing circuit with our two-way, T2 Check Valve. Requiring no air or electricity to operate, our check valve is the most cost-effective and efficient answer for pump isolation when you have two pumps in parallel.
What we offer
Our KREBS® T2 Check Valve does the work - you just operate the pumps
In a process plant, standby pumps often operate in critical areas. In many instances, two or more pumps discharge into a common line leading to the next step in the process. Prior to the development of the T2 Check Valve, this junction required a shutoff valve on each pump discharge line to prevent the fluid from flowing back through the inoperative pump.
The KREBS T2 Check Valve performs these functions automatically, operating in any position, without any external energy source. It prevents the need for multiple knife gate valves and expensive rubber-lined piping components. The body of the T2 Valve replaces the “Y” fitting formerly required for standby pumps and is designed for maximum abrasion resistance and minimal pressure drop – making it a trouble-free addition to your piping system.
Designed for installation in equipment where there are two pumps operating in parallel, it allows either of the pumps to work individually, as well as simultaneously during the changeover.
Our Check Valve has been proven since the mid 1960s. It was invented by a mining professional, specifically for the mining industry. Today, there is hardly a mining facility in the world that has not had some experience with our KREBS T2 valves. It simply is the best answer available for pump isolation.
Key benefits
Your ideal valve solution for pump isolation
Automatic, trouble-free operation
The T2 Check Valve is self-actuating and requires no air or electricity for an external actuator to be interlocked with a pump motor starter. It is designed for maximum abrasion resistance and minimal pressure drop.
Simple, low-cost solution
Operating automatically in any orientation, the T2 Check Valve is a simple solution for pump isolation. With no actuators or controls required, it is available at half the cost of a conventional system.
Proven and reliable
Trusted for more than 60 years, the T2 Check Valve is used by nearly every mining company in the world.
Product features
Automatic simplicity for your standby pump isolation
Our well-established KREBS Check Valve is a self-actuated, two-way, check valve, specifically designed for isolation of duty and standby pumps. Head loss is very low: about 0.5 feet of slurry at 6 ft/sec. inlet velocity. Wear rates are proportional to the square of inlet velocity, so the use of a larger size can pay dividends.
The KREBS Check Valve T2 series is designed for one operating pump and one standby pump. All connected pumps may be operated simultaneously during changeovers.
Our T2 Valves are available in sizes from 80 mm (3-in) to 250 mm (10-in) in cast bodies and 80 mm (3-in) to 750 mm (30-in) in fabricated bodies, with flanged or Victaulic connections, and pressure ratings of 150, 300, 450 and 600 psi. Lining materials can include pure gum rubber, chlorobuytl, neoprene and EPDM.
KREBS® T2 Check Valve features
Rugged construction, and proven abrasion-resistant
Low cost – 40% to 50% less costly than a traditional two-knife-gate/Y-lateral setup
Self-actuating – no air or electricity required
Minimal pressure drop
Available in 150 – 600 PSIG ratings
Sizes fabricated from A36 Steel range from 80 mm (3-in) through 750 mm (30-in)
Sizes for cast ductile iron range from 80 mm (3-in) through 250 mm (10-in)
Hot vulcanised liners include pure gum rubber, chlorobuytl, neoprene and EPDM.
Can be supplied with Victaulic™ or flange fittings
Multiple drilling patterns available to meet your specifications
Stay on top of trends, analyses and innovations moving the mining industry.
Contact FLSmidth
Thank you for message
We have received your enquiry and will reply as soon as possible
Please do not use Internet Explorer
For your safety its recommended to not use Internet Explorer Browser. To get best of browsing features in flsmidth.com, please choose Google Chrome, FireFox or Mozilla for browsing.